Where to Buy a Quality Torque Meter?- The Buying Guide

The ideal use of a meter is for industries and laboratories where you can get precise measures of torque data via an USB cable and read it via a personal computer. This can help you save the data and let you compare what you have measured later on. It’s a tool that should be a part of every mechanics tool set. Torque meter is helping various automotive companies make products and grow business tremendously.

Why Torque Meters are Important?

When you decide to buy a meter, you are buying a tool that’s going to measure the applied force/load/tension on a threaded fastener. The apparatus is going to achieve the fastening torque efficiently & accurately without needing an elbow grease.

When the fastener is accurately torqued, it would stay tight no matter how much vibration occurs while the vehicle is being used. If your fasteners are not properly torqued, that can make it disastrous for your automobile. If the fastener is either too loose or tight, it could fail during the operation due to constant vibration or strain. To stay away from these issues, a great quality meter is helpful.

Process of Working of a Meter?

The majority of the torque meter you find nowadays has a ratchet mechanism that will allow you to keep the wrench on fastener once it’s reached the end of a rotation. Just turn the meter in the opposite direction & start all over again.

If you work on cars and you want to speed up the process of torque measurements, then torque meter is a fundamental tool that you demand in your toolbox. If you rush to buy the meter, there are few things that you need to examine in mind:

Chose Accurate Meter

 

It’s the most significant work because it can give you a detailed reading. Make sure you use a meter that has the efficiency below 5%. You can also choose below 2% accuracy as it comes in new meters and they are less expensive.

How Often You Can Use the Tool?

You can use the tool when you need to measure the torque of a device. You may find expensive tools but before spending money on costly tools, you should find a company that generates the economical meters.

Chose Quality Products

 

You should opt for the quality meter that has LED readouts or that comes with buzzing or beeping options when you do the target setting.

Select United Kingdom Products 

Make certain you have the product that is made in the United Kingdom because European companies are well versed in making quality tools. UK meters are manufactured to meet high-quality standards with great warranties.

Visit a leading company that makes quality automobile tools

If you are looking for a perfect meter to measure torque for your automotive industry or vehicles, simply visit the website of UK market leader Datum Electronics. They have products like a shaft power meter, rotary torque sensor, strain gauge sensors, monitoring system and more. Growing your business or helping your clients will not be an issue with their tools.

Torque Transducer & Its Application in the Railway Field

The train is recognized as the fast and convenient travel option of all time and over the past decades; it has undergone various significant development for the safety and efficiency. Sensors are the main aspect when it comes to running & ensuring the security of passengers and engineers often work on this. Various things have worked in the field of electrification in recent years and torque transducer has played a great role in this progress.

What Are the Fields Where You Can Measure Torque in Railway Applications?

• Brake Systems
• Wagon Axles
• Current Collectors
• Car Coupling
• Infrastructure

Use of Sensors in Braking Systems

Transducers can measure the load on the axle and regulate the braking force in the brake systems. The brake system of the railway is divided into many stages. Trains have light braking to actual stop and different systems that can cooperate in stopping a train.

 Long ago the passengers used to hang on for keeping their feet on the ground and the transducers installed in the brakes or wheel axles can measure the force acting on mechanics during the braking process & regulate the brake force on the basis of these forces. Due to this, the closed-loop brake controls can be carried out efficiently.

Detecting Malfunctions

 

You can simply use the torque meter in the field of pantograph shaft transducers. The contact force related to pantograph can define the quality of electrical connection. If this is found too weak, there could be a reason that the electrical contact resistance may be too high. A drop in performance can occur due to this reason. If the load is extremely high, thus the malfunction may arise and torque meter can help you with that.

Usually, the rail tracks are electrified and by the year 2025, 70% of lines are to be equipped with conductor rails or overhead lines. Electrified tracks are the future and certainly, they are going to replace the overhead lines.

Wagon coupling is a defect in trains and for this force, the transducer can find the trainloads & warning issue in case of overloading or accidental disconnection.

What are the Application Areas of Torque Transducer?

Applications of force sensors in the railway sector are diverse. Using the transducers in the railway infrastructure is a topic of interest for many and therefore Datum electronics has brought its quality shaft and power measurement equipment like M425 rotary torque sensor, FF425 non-contact flange torque transducer, and RS425 contactless torque transducer.

If we talk about the M425 sensor, it’s made to fit most works where you need to measure rotary torque & power measurements for the drive train. It can provide the customer control over the test with sample rates from 1sps up to 4000sps as a standard.

Ff425 transducer has flange coupling at the end and has various advantages over-torque measurement systems in the market.

RS425 transducer has lightweight and long-term operations with low upkeep and its ideal for keyway shaft. The device is easy to fit in train applications.

These products are highly usable in the railway applications and You can easily check out to Datum Electronics more products for torque and power shaft measurements by visiting the website.

Why Torque Sensor Is Important In Electric Cars?

Choosing the right sensor for an electric car is an important element in running an automotive industry. The increasing demand for torque related knowledge is absolutely crucial, not only in the combustion engines but also for the map controlling. This thing is also used in electric vehicles. Torque Sensor is the power factor for any vehicle but it also affects the driving comfort of any car. So it’s known as the deciding factor in the automobile corporation.

Effectiveness of Sensors in Cars

Electric cars are the future of the auto industry, and in the future, the output of the electrical motor will directly connect with the drive axle. So in many cars, you won’t be able to see gears. This thing works due to the direct connection and this connection results in torque delivered by an electrical motor acting directly on the shaft & resulting in the direct flow of power.

This direct behavior is very crucial to measure because if there would be a direct flow of power in a car, there can be an occurrence of failure of magnetic motor or unwanted power output has a direct effect on the driving performance of the vehicle.

Due to this, there is mandatory installation of some additional sensors for intercepting or checking the validity of the faults for doing the suitable emergency shutdowns. Force can affect the electric motor to drive and when it comes from the road, it also affects the electrical motor.

The bidirectional force flows are the crucial point of control, measurement, and evaluation in keeping the functional safety of any vehicle. When you use the torque sensor, you can measure power directly in the driveshaft, from where it can collect the safety  information & it then passes the information to the controller.

How to Use this Sensor in the Car?

• For Transmission- The electric transmission can be controlled often by torque.
• For Axle Drive- Electric motors are placed on the rear or front axle.
• ABS- This is used to measure the resulting force by the sensor.
• Direct Drive- These are the drives that already exist in wheels for driving & braking.

Measuring the Process of Wheel Drives of Sensor

Measuring the wheel drives are easier when you handle the electrical motors in the whole vehicle. Wheel drives can make measuring work more difficult. Every drive on each wheel has its performance behavior that is calibrated to each other but this can be detuned by the aging effects.

The tuning of these motors can tell you about the driving nature of the vehicle. If you don’t check the parameters given on electric motor output, you will find that it’s impossible to find the driving behavior of the vehicle. When you manage these sensors on electric motors, you can easily measure the behavior of each motor. You can use sensors for setpoint input in the control unit for regulating the motors.

Prioritizing Your Torque Sensor To Get The Most Out Of Your Business

 You can easily buy the high-quality torque transducer and sensor from a leading brand Datum Electronics. Our brand is trusted worldwide and therefore big brands like Kawasaki, CAT, BP, Castrol, Rolls Royce, etc have worked with us in their torque and shaft power measurement equipment needs. Give us a call and we will bring you the sensors like M425, FF425, RS425 and more.

What are the imperative technologies for measurement with torque sensor in serial applications?

The market has changed in the recent era and there is an enormous part of the game changer sensors that have very much impressed the automotive industry. Torque Sensor is the one that has positively revolutionized the industry.

In most applications, where torque acquisition is needed, the area to be measured is rotated. Rotation of the shaft tells the measurement of the challenge. The static strain gauge is used for the static forms & read out the wired connection and but that’s not the case with the rotating shaft.

Various sensors have revealed themselves in applications and become vital. Still, many tasks are to be done by sensors, but in industrial treatments, measurement of torque is highly significant for sensor technology. Different solutions for diverse torque measurements are there, and we will help you understand that easily.

·       Shaft Power Measurement Kit

 

The strain gauge is an old device and over the years, it has gained maturity in various field usages. Torque measurement with the help of strain gauges has been familiar in many fields. To do this, the strain gauge is glued for measuring the shaft to measure the effect of force on the shaft by giving a change in the resistance.

For this, Datum Electronics has come up with its product shaft power measurement kits. This helps companies get torque, rpm data and power on the site with ease. This helps engineers measure and monitor the shaft power precisely. The kit will give you the right data when attached to a personal computer in less than one hour.

·         FF425 Non-contact Flange Torque Transducer

 

This torque transducer is made to fit comfortably with the test rig and drive train with standard DIN coupling sizes. Drive train helps in giving power to the driving wheels of the motored vehicle. As it have flange couplings at one end of the transducer. Therefore it is considered highly great other than the different measurement systems in the market.

This transducer uses a strain gauge shaft for right and reliable torque measurements. Its features includes full non-contact transmission, 0.1% accuracy, 0.1% non-linearity, 0.05% repeatability, 1 to 4000 sample per second of sample rate, serial torque outputs like USB logging, Modbus upd, ethernet and more, analog torque outputs, -10 to 70-degree centigrade operating range, IP54 environment protection and great power supply 10-24Vdc 250mA.

·         Rs 425 Contactless Transducer

 

This transducer can replace the existing drive shaft on test rigs and in drive lines. The transducer has features like a lightweight, the separate rotor, stator set, low maintenance, key shaft for easy fitting, high-speed applications, 0nm to 10,000nm range, analog output, underwater applications.

Grab Your Perfect Apparatus Now!

 

Choosing the right equipment for torque measurement can be accomplished regularly by visiting our website Datum Electronics. We are in the profession since 1989 and since thus we are providing reliable solutions to our customers for their vehicles and business growth. Chose the various products from our website and bring out the best potential with your automotive business today!