How Ff425 Non Contact Flange Torque Transducer Can Help You?

For over 25 years, PCB load and torque sensors have served customers meet the most stringent test and evaluation needs in aerospace, automotive, R&D and process control. The main aspect behind this torque transducer is a strain gauge. The strain gauges are arranged in a wheat stone bridge circuit that can convert physical and mechanical force in an electronic signal that can be filtered, displayed and recorded for further handling. This radiometric electrical signal is reciprocal to the connected mechanical force.

What is FF425 Transducer?

A product of datum electronics, FF425 non-contact flange torque transducer is designed for the simple fitting in line with any drive train or test rig by applying the standard DIN size couplings. This equipment has various positives over the torque measurement systems in the market, as this consists of flange couplings at either end of the transducer.

FF425 transducer makes use of a strain gauge shaft for valid and good torque measurement & a set of revolving on shaft conditioning electronics. Digital signals are then transmitted to the non-rotating part of the system or stator that gives you a strong & highly accurate torque measurement solution.

If you use our revolutionary electronics as used in our industry-standard, the ff425 transducer can allow customers higher resolution for up to 24-bit resolution & the expertise to accept sample rate from 1 up to 4000sps.

The Important Features of FF425 Flange Torque Sensor 

This torque sensor has 11 standard torque ranges. The torque sensor can allow you high accuracy, operational stability, high signal resolution & wide range of signal output across the whole stretch of torque from 0-100nm and up to 30,000nm.

 

• The device comes with totally non-contact transmission and hardware.

• The accuracy of the device is 0.1%.

• Non-linearity of the equipment is 0.1%.

• The repeatability of the appliance is 0.05%.

• The sample rate can go up to from 1 to 4000 samples per second.

• The engine can give you serial torque outputs. For this machinery, you get SCADA outputs like RS485, RS232, Modbus UPD, Ethernet, and USB logging.

• Get analogue torque output having values 4-20mA configured 4-20mA for (4-12-20mA): +/-10Vdc, +/-5Vdc, 0-10Vdc or 0-5Vdc.

• The machinery the operation range of -10 to +70’c.

• Get environmental protection of IP54.

• Get power transfer for 10-24vdc 250mA.

 

Where Else Can You Fit This Device?

You can easily fit this machine into your existing test rig, drive train, and test bench. With the help of standard DIN flanges, coupling and fittings, the FF425 torque sensor is certainly made more efficient than the other options. The minimum operating envelope of datum electronics flange torque meter starts from 100mm & it keeps on increasing depending upon torque measurement requirements.

Benefits of This Device?

• Get the greatest performance for up to 24bit resolution

• Get selectable sample cost of up to 4000sps

• Get rotary speed for up to 20,000rpm.

• Get an ideal design for a secure fit.

• The gear is a high torsional stiffness model.

• Can go the bespoke range to 20MNm

• Work on analog output

• Compatible with LABVIEW software

 

Where to Buy This Apparatus?

 

Simply connect with the Datum Electronics website and check out our products that can fulfill your requirements and thus call at our toll-free number. World’s leader in torque and shaft power measurement.